Waste oil heaters have been around for decades, but there are still plenty of misconceptions about what you can burn, whether the equipment is legal, and what actually happens to the used oil.
So let’s clear a few things up.
When properly installed and operated under applicable regulations, a waste oil heater provides businesses with a practical way to recover energy from used oil they already generate.
For automotive shops, farms, fleets, equipment dealers, and other operations that regularly change oil, that can mean less waste to manage and less conventional heating fuel to buy.
And yes, the EPA specifically addresses burning used oil for energy recovery.
Is Burning Used Oil Legal?
Yes, under specific conditions.
Federal EPA regulations under 40 CFR 279.23 allow generators to burn used oil in used-oil-fired space heaters when three basic requirements are met:
- The heater burns used oil generated by the owner/operator or used oil received from do-it-yourself oil changers.
- The heater has a maximum design capacity of no more than 0.5 million BTUs per hour.
- Combustion gases are properly vented to the outside ambient air.
That means a commercial shop generating its own used oil can use qualifying equipment to recover that oil as heat, provided the operation complies with these applicable requirements.
There is one important caveat: federal rules are not the only rules.
Local governments can establish requirements that are more restrictive than federal EPA standards. Before installing or operating a waste oil heater, owners should confirm the regulations that apply in their state and municipality.
Myth: “The EPA Doesn’t Allow Shops to Burn Used Oil”
That’s simply not true.
The EPA’s used oil regulations specifically include provisions for used-oil-fired space heaters. The agency also recognizes burning used oil for energy recovery as a form of recycling when performed under the applicable requirements.
EPA regulations even account for both petroleum-based and synthetic oils within the definition of used oil.
The issue isn’t whether used oil can ever be burned. It’s what you’re burning, where it came from, what equipment you’re using, and whether you’re following the rules.
Those details are important.
What Is Used Oil?
The EPA defines used oil as petroleum-based or synthetic oil that has been used and, as a result, has become contaminated by physical or chemical impurities.
In a working shop, that can include oil removed during routine service and maintenance of vehicles and equipment. Once that oil has done its job in an engine or piece of equipment, it has to go somewhere.
Dumping it isn’t an option. Neither is treating the waste tank like a garbage can for every liquid sitting around the shop.
Used oil needs to be properly collected, stored, managed, and recycled.
Energy recovery gives qualifying businesses another option.
Why Burn Used Oil Instead of Paying for New Heating Fuel?
This is where alternative-fuel heating starts making a lot of sense for businesses that already generate used oil.
Think about the normal process: your shop buys lubricating oil, you use it, and you drain it. Now you have used oil that needs to be managed.
Meanwhile, winter rolls around and you’re paying for another fuel source to heat the building. A waste oil heater allows qualifying operations to use approved waste oil as an alternative heating fuel.
This can provide several practical benefits:
Reduce Conventional Heating Fuel Purchases
Every BTU produced from approved used oil is heat that doesn’t have to come from another purchased fuel source.
The actual savings will depend on your facility, climate, oil supply, heater operation, and conventional energy costs, but the basic advantage is pretty straightforward.
You’re generating a potential fuel source through normal business operations. You might as well put it to work.
Recover Energy From a Material You Already Have
Used oil still contains recoverable energy.
Instead of looking at every gallon strictly as something that needs to leave the property, energy recovery allows eligible businesses to put that material to another productive use.
For operations generating substantial quantities of used oil throughout the year, that can be especially valuable during the heating season.
Reduce Used Oil Management and Disposal Needs
Using eligible oil on-site can reduce the volume that needs to be hauled away.
That doesn’t eliminate the need to properly manage used oil. Storage, handling, spill prevention, fuel quality, and applicable regulations still matter.
But you’re getting something useful out of the oil instead of simply treating it as something you need to get rid of.
Put More of Your Own Resources Back Into the Business
Waste oil heating is especially practical for businesses where used oil is simply part of the job.
That includes:
- Automotive repair facilities
- Truck and fleet maintenance shops
- Agricultural operations
- Heavy equipment repair facilities
- Equipment dealerships
- Construction and maintenance operations
If you’re already producing approved used oil, alternative-fuel heating can reduce your dependence on a separate heating fuel supply.
Myth: The person who picks up and transports my oil for disposal or recycling is responsible should a spill occur.
No. Cradle-to-grave liability means a business is liable for the proper disposal of used oil from the moment the oil drains into a pan until it is processed or burned. This includes any accidental spills or improper dumping by a used oil hauler.
Therefore, it is imperative for industries and facilities that generate waste oil, handle antifreeze, and use oil filters to understand their hazardous waste liability and consider ways to minimize future liability. Knowing what options are available to reduce cradle-to-grave liability is the first step in a successful, long-term hazardous waste management program.
Myth: “You Can Burn Anything Oily”
No. A waste oil heater isn’t an excuse to dump random chemicals into a tank and light them up.
The fuel going into the heater needs to meet the requirements of the heater manufacturer as well as applicable federal, state, and local regulations.
Contaminating used oil with solvents, chemicals, or other inappropriate materials can create safety, equipment, and regulatory problems.
This is one area where getting creative is a bad idea.
Follow the manufacturer’s approved-fuel requirements and keep incompatible materials out of the waste oil supply.
Myth: “Used Oil Heat Means Smoke Pouring Out of the Shop”
A properly designed waste oil heater isn’t an open barrel with a match thrown into it.
Commercial waste oil heating systems control fuel delivery, combustion air, ignition, and exhaust. Combustion gases must be properly vented outdoors, and the system has to be installed, operated, and maintained correctly.
That last part is important.
Waste oil contains contaminants picked up during normal equipment operation. Routine cleaning and maintenance are part of owning a waste oil heater.
Follow the manufacturer’s instructions, use approved fuels, maintain the burner and combustion chamber, and make sure the venting system is properly installed.
Does Synthetic Oil Count as Used Oil?
Synthetic oil doesn’t automatically fall outside EPA’s definition.
EPA defines used oil as petroleum-based or synthetic oil that has been used and contaminated through normal use.
For today’s automotive and equipment shops, that’s increasingly important. Synthetic lubricants are common, which means the makeup of the used-oil tank has changed considerably from what shops were dealing with decades ago.
Whether a specific waste oil heater can burn a particular synthetic oil or mixture is a separate equipment question. Always follow the approved-fuel list for the heater you’re operating.
Is Waste Oil Heating Better for the Environment?
There are real environmental benefits to properly managing and recycling used oil, but this is another area where exaggerated claims don’t help anybody.
Used oil can contaminate soil and water when it is handled or disposed of improperly. The EPA encourages proper management, reuse, and recycling rather than improper disposal.
Utilizing qualifying oil for energy recovery keeps that oil in a managed system and extracts functional energy from it. It can also reduce a facility’s need for newly purchased conventional heating fuel.
This doesn’t mean that burning used oil has zero emissions. Combustion is still combustion.
The responsible argument for waste oil heating is simpler: you’re recovering useful energy from a material that your operation already generates while following regulations designed around its proper management.
What Does EPA-Compliant Waste Oil Heating Actually Require?
At the federal level, the big three requirements for the on-site space-heater provision are straightforward:
Burn the right oil.
The heater must burn used oil generated by the owner/operator or qualifying DIY-generated used oil.
Use appropriately sized equipment.
The space heater must have a maximum design capacity of 500,000 BTUs per hour or less.
Vent it outside.
Combustion gases must be vented to ambient outdoor air.
Beyond those federal provisions, businesses need to follow applicable state and local requirements and the installation, operation, fuel, venting, and maintenance instructions provided by the heater manufacturer.
Waste Oil Isn’t Garbage. Manage It Like a Fuel.
That’s probably the biggest misconception worth correcting. Used oil isn’t something you can dump wherever you want, but it isn’t automatically useless either.
For businesses that generate approved used oil, a properly installed waste oil heater can turn that material into a practical alternative heating fuel. You reduce reliance on purchased heating fuel, you recover energy from oil your operation already uses, and you have another responsible option for managing a material that would otherwise need to leave your facility.
Lanair has been building waste oil heating equipment in Janesville, Wisconsin, since 1976. Today’s systems continue to give automotive shops, farms, fleets, and other working facilities a way to put their used oil back to work.
Learn more about Lanair’s heating systems and determine whether waste oil heat makes sense for your facility.
Regulations vary by jurisdiction. Always verify current federal, state, and local requirements before installing or operating a waste oil heating system, and follow the manufacturer’s instructions regarding approved fuels, installation, operation, and maintenance.